TM 5-2420-231-23-2
0111
CLEANING AND INSPECTION
0111
1. Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
2. Clean and inspect all parts IAW Electrical General Maintenance Instructions (WP 0370).
END OF TASK
ASSEMBLY
0111
1. Wrap cold start temperature switch (Figure 16, Item 5) with teflon tape and install on cylinder head
(Figure 16, Item 1).
NOTE
Install coolant fitting as noted during removal.
2. Wrap coolant fitting threads (Figure 16, Item 4) with teflon tape and install on cylinder head (Figure 16, Item 1).
3. Install fuel filter bracket (Figure 16, Item 2) and three bolts (Figure 16, Item 3) on cylinder head
(Figure 16, Item 1).
Figure 16. Filter Bracket.
0111
4. Install four new crushwashers (Figure 17, Item 2) on fuel injectors (Figure 17, Item 1).
Figure 17. Fuel Injector Crushwashers.
0111