TM 5-3805-291-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 4. Implement Control - Continued.
(MID 082)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
427-C1655
N OT E
0353 03
The following test procedure may create other diagnostic codes. Ignore these
may create other diagnostic codes. Ignore these created diagnostic codes and
clear diagnostic codes when original diagnostic code is corrected.
Ensure diagnostic code is active.
1. Check for power at sensor.
(a) Do not disconnect wiring harness
connector from sensor.
(b) Turn engine start and battery
disconnect switches to ON position
(TM 5-3805-291-10).
1. If voltage is system voltage, go to Test 2.
(c) At wiring harness connector for
sensor, measure voltage from
2. If voltage is not system voltage, +battery
contact 1 to contact 2.
circuit in wiring harness has failed.
Replace wiring harness in question (WP
0195 00 thru WP 0201 00).
2. Check for proper ground at sensor.
(a) Wiring harness remains connected
to sensor.
(b) Turn engine start and battery
disconnect switches to OFF
position (TM 5-3805-291-10).
